ARE CALCIUM SILICATE SEALERS LESS CYTOTOXIC AND GENOTOXIC THAN EPOXY RESIN SEALERS? A SYSTEMATIC REVIEW OF IN VITRO STUDIES

Aims: This systematic review aimed to evaluate whether calcium silicate-based sealers are less cytotoxicity and genotoxicity than epoxy resin-based sealers. Materials and Methods: Systematic searches were conducted for studies published up to September 27th, 2022, without restriction for language or year of publication, in the following databases: MEDLINE/PubMed, Scopus, Web of Science and Grey Literature Report. Only in vitrostudies that evaluated the cytotoxicity or genotoxicity of calcium silicate and epoxy resin-based sealers were included. The quality assessment was performed. Results: After duplicate removal and eligibility criteria assessment, a total of thirty-four studies were included. Twenty-eight studies had a low risk of bias, and six studies had amoderate risk of bias. In general, calcium silicate-based sealers had a lower cytotoxic and genotoxic potential than epoxy-resin based sealers.Conclusions: Based on the findings from in vitrostudies, calcium silicate-based sealers are less cytotoxic andgenotoxic than epoxy resin-based sealers

POSTOPERATIVE PAIN INCIDENCE AND INTENSITY FOLLOWING ROOT CANAL OBTURATION WITH BIOCERAMIC AND OTHER SEALERS: A SYSTEMATIC REVIEW WITH META-ANALYSIS

Aims: To investigate whether bioceramicsealers induce a lower incidence and intensity of postoperative pain compared to other sealers. Materials and Methods: Six electronic databases were searched for studies published up to April 2022, following the PICOS strategy: (P) adult patients undergoing root canal treatment or retreatment; (I) root canal filling using bioceramic sealer; (C) root canal filling using other types of sealers; (O) Primary: postoperative pain incidence and/or intensity; Secondary: number of medication intake; (S) randomizedclinical trials. Risk of bias assessment was performed with the revised Cochrane risk of bias tools for randomized trials (RoB 2). Overall certainty of evidence was assessed through the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) tool. Results: Ten studies were included. Eight studies had a low risk of bias, and two had some concerns risk. Meta-analyses showed no differences regarding postoperative pain intensity and incidence between bioceramic sealers and AH Plus. Number of medication intake seemed to be associated to the preoperative diagnosis. Zinc oxide-eugenol sealer demonstrated an intense postoperative pain compared to bioceramic sealers and AH Plus. GRADE analysis showed a low certainty of evidence for all outcomes. Conclusions: There seem to be no differences between bioceramic sealers and AH Plus regarding postoperative pain intensity and incidence. Number of medication intake seem to be associated to the preoperative diagnosis. Zinc oxide-eugenol evoked a more pronounced postoperative pain.

The effects of heating on the physicochemical properties of tricalcium silicate root canal sealers

Abstract This study evaluated the effect of heating on the physicochemical properties and surface changes of tricalcium silicate sealers. Three tricalcium silicate root canal sealers (Bio-C Sealer, BioRoot-RCS, EndoSequence BC Sealer), and one epoxy resin-based sealer (AH Plus; control) were tested. The effect of heating on setting time (ST) and flowability were assessed according to ANSI/ADA 57 and ISO 6876 standards. Solubility and dimensional change (DC) of the set sealers were evaluated at 24 hours and after 30 days; the pH of the water used in the DC testing was also measured. Tests were repeated with heated sealers in an oven at 100 °C for 1 min. SEM and EDS analysis were performed. Data were analyzed using One-Way ANOVA and Tukey post-hoc tests (α=5%). Heating decreased the ST for AH Plus and EndoSequence (p<0.05). Heating reduced flowability (p<0.05) and increased pH for AH Plus (p<0.05). The solubility of Bio-C (dried specimens) was not in accordance with the ANSI/ADA standard. The solubility of EndoSequence was significantly higher (p<0.05) when it was heated and dried after 30 days. DC of Bio-C (24 h and 30 days), BioRoot-RCS (30 days) and AH Plus (24 h and 30 days) were not in accordance with the standards. SEM and EDS analysis showed significant changes in sealer microstructure after heating. In conclusion, heating decreased the ST and increased the solubility of EndoSequence BC sealer. No significant changes in flowability, DC, and pH were identified for all three tricalcium silicate sealers after heat application. However, all sealers had significant surface changes.

Resumo Este estudo avaliou o efeito do aquecimento nas propriedades físico-químicas e nas alterações superficiais de cimentos de silicato tricálcico. Três cimentos endodônticos de silicato tricálcico (Bio-C Sealer, BioRoot-RCS, EndoSequence BC Sealer) e um cimento à base de resina epóxi (AH Plus) foram testados para avaliar o efeito do aquecimento no tempo de presa (TP) e escoamento de acordo com as normas ANSI/ADA 57 e ISO 6876. A solubilidade e alteração dimensional (AD) dos cimentos foram avaliadas após 24 horas e 30 dias. O pH da água usada no teste de AD também foi medido. Os testes foram repetidos com cimentos aquecidos em um forno a 100 °C por 1 min. Análises em MEV e EDS foram realizadas. Os dados foram analisados pelos testes de ANOVA-1 via e post hoc de Tukey (α=5%). O aquecimento diminuiu o TP para AH Plus e EndoSequence (p<0,05). O aquecimento reduziu o escoamento (p<0,05) e aumentou o pH do AH Plus (p<0,05). A solubilidade do Bio-C (amostras desidratadas) não estava de acordo com o padrão ANSI/ADA. A solubilidade da EndoSequence foi significativamente maior (p<0,05) quando aquecida e desidratada após 30 dias. As AD de Bio-C (24 h e 30 dias), BioRoot-RCS (30 dias) e AH Plus (24 h e 30 dias) não estavam de acordo com as normas ADA e ISO. A análise em MEV e EDS mostrou alterações significativas na estrutura dos cimentos após aquecimento. Em conclusão, o aquecimento diminuiu o TP e aumentou a solubilidade do cimento EndoSequence BC. Não foram identificadas mudanças significativas no escoamento, AD e pH para os cimentos de silicato tricálcico após aquecimento. Porém, todos os cimentos tiveram alterações significativas na superfície.

Elaboración de modelos dentales didácticos en resina epóxica / Elaboration of didactic dental models in epoxy resin

Los modelos de estudio son un registro fundamental para el diagnóstico, el plan de tratamiento, la presentación de caso y la evaluación del progreso del tratamiento dental; son registros anatomofisiológicos de las arcadas dentarias que sirven para evaluar la dentición en los tres planos del espacio y la oclusión en la relación cúspide-fosa, en una dimensión estática y dinámica. Para obtener los modelos de estudio es imprescindible obtener impresiones totales con diversos materiales de impresión de los arcos dentarios, que reproduzcan fielmente todos los detalles anatómicos, para posteriormente obtener un modelo en yeso piedra. Los modelos obtenidos a partir de una impresión generalmente son a base de yeso odontológico, los cuales a pesar de sus mejoras aún conservan algunas características negativas como: baja resistencia a la fractura por impacto, baja resistencia al desgaste por abrasión, inestabilidad dimensional y radiopacidad que impide la simulación de procedimientos endodóncicos. Con la finalidad de mejorar la simulación en la práctica odontológica, se usa la resina epóxica que puede emplearse en la obtención de modelos, este material es más resistente y presenta una mayor resistencia a la abrasión; además es radiolúcido, por lo que es útil para la réplica de preparaciones y procedimientos de simulación endodóntica. Los detalles de la superficie obtenidos con resina epóxica son superiores a los obtenidos con yeso. El uso de simuladores es una herramienta educativa con la que se favorece la adquisición de ciertas habilidades, destrezas, técnicas y competencias necesarias para la formación de estudiantes o profesionales de odontología. En el presente trabajo se describe la técnica para la elaboración de modelos dentales didácticos en resina epóxica para utilizarlos en la enseñanza de la práctica odontológica (AU)

Study studies are a fundamental record for diagnosis, treatment plan, case presentation and evaluation of the progress of dental treatment. They are anatomo-physiological records of the dental arches to evaluate the dentition in the three planes of space and the occlusion in the cusp-fossa relationships, in a static and dynamic dimension. To obtain the study models, it is essential to obtain total impressions with various impression materials of the dental arches, which faithfully reproduce all the anatomical details, in order to later obtain a stone plaster model. Those obtained from an impression are generally based on dental plaster, which despite its improvements still retain some negative characteristics such as: low resistance to fracture by impact, low resistance to wear by abrasion, dimensional instability and radio opacity that prevents the simulation of endodontic procedures. In order to improve simulation in dental practice, the use of epoxy resin can be used to obtain models, this material is more resistant and has greater resistance to abrasion, it is radiolucent, which makes them Useful for replicating preparations and endodontic simulation procedures, the surface details obtained with epoxy resin are superior to those obtained with plaster. The use of simulators is an educational tool that favors the acquisition of certain abilities, skills, techniques and competencies necessary for the training of the student or professional in dentistry. In the present work, the technique for the elaboration of didactic dental models in epoxy resin to be used in the teaching of dental practice is described.(AU)

Effects of thermal cycling on bonding properties of novel low-shrinkage resin adhesive / 华西口腔医学杂志

OBJECTIVES@#The current study aimed to investigate the bonding properties of a novel low-shrinkage resin adhesive containing expanding monomer and epoxy resin monomer after thermal cycling aging treatment.@*METHODS@#Expanding monomer of 3,9-diethyl-3,9-dimethylol-1,5,7,11-tetraoxaspiro-[5,5] undecane (DDTU) as an anti-shrinkage additive and unsaturated epoxy monomer of diallyl bisphenol A diglycidyl ether (DBDE) as a coupling agent were synthesized. A blend of DDTU and DBDE at a mass ratio of 1∶1, referred to as "UE", was added into the resin matrix at the mass fraction of 20% to prepare a novel low-shrinkage resin adhesive.Then, the methacrylate resin adhesive without UE was used as the blank control group, and a commercial resin adhesive system was selected as the commercial control group. Moreover, the resin-dentin bonding and micro-leakage testing specimens were prepared for the thermal cycling aging treatment. The bonding strength was tested, the fracture modes were calculated, the bonding fracture surface was observed by scanning electron microscope (SEM), and the dye penetration was used to evaluate the tooth-restoration marginal interface micro-leakage. All the data were analyzed statistically.@*RESULTS@#After aging, the dentin bonding strength of the experimental group was (19.20±1.03) MPa without a significant decrease (P>0.05), that of the blank control group was (11.22±1.48) MPa with a significant decrease (P<0.05) and that of the commercial control group was (19.16±1.68) MPa without a significant decrease (P>0.05). The interface fracture was observed as the main fracture mode in each group after thermal cycling by SEM. The fractured bonding surfaces of the experimental group often occurred on the top of the hybrid layer, whereas those of the blank and commercial control groups mostly occurred on the bottom of the hybrid layer. Micro-leakage rating counts of specimens before and after thermal cycling were as follows: the experimental group was primarily 0 grade, thereby indicating that a relatively ideal marginal sealing effect could be achieved (P>0.05); meanwhile, the blank control group was primarily 1 grade, and the penetration depth of dye significantly increased after thermal cycling (P<0.05); the commercial control group was primarily 0 grade without statistical difference before and after thermal cycling (P>0.05), while a significant difference was observed between the commercial control group and experimental group after thermal cycling (P<0.05).@*CONCLUSIONS@#The novel low-shrinkage resin adhesive containing 20%UE exhibited excellent bonding properties even after thermal cycling aging treatment, thereby showing a promising prospect for dental application.

Micro-push-out bond strength of mineral­based root canal sealer in canals with different tapers / Fuerza de unión por micro-expulsión del sellador de conductos radiculares a base de minerales en conductos con diferentes ahusamientos

Objective: The aim of this study was to assess the micro-push-out bond strength of a mineral-based root canal sealer, BioRoot RCS in canals prepared by K3XF rotary systems of two different tapers. Material and Methods: Eighty caries free maxillary central incisors were used in this study. The samples were allocated into 4 groups (n=20) according to the root canal sealer and taper of the rotary instruments. The samples were obturated using single cone obturation technique. From each root 1mm thick slices at coronal, middle and apical thirds were collected using hard tissue microtome under continuous water coolant. Push-out tests were done for these sections using a Universal testing machine (INSTRON 8801) at a crosshead speed of 1mm/min. One-way analysis of variance (ANOVA) was used to compare the bond strengths within groups and Tukey's multiple post hoc analysis was used for pair-wise comparison of bond strengths. Results: AH Plus exhibited higher micro-push-out bond strength than BioRootRCS though they did not differ significantly (p>0.05). Preparation of root canals with 6% taper rotary instruments showed higher bond strength than 4% though they did not differ significantly (p>0.05). Conclusion: There was no significant difference between micro-push-out bond strength values of BioRoot RCS and AH Plus. The bond strength values were high in 6% taper canals than 4% canals though the difference was not significant statistically.

Objetivo: El objetivo de este estudio fue evaluar la fuerza de unión por micro-expulsión de un sellador de conductos radiculares de base mineral, BioRoot RCS, en conductos preparados por sistemas rotativos K3XF con dos conos diferentes. Material y Métodos: En este estudio se utilizaron 80 incisivos centrales superiores libres de caries. Las muestras se distribuyeron en cuatro grupos (n = 20) de acuerdo al sellador del conducto radicular y al cono de los instrumentos rotativos. Las muestras se obturaron mediante la técnica de obturación de un solo cono. De cada raíz se recogieron rodajas de 1 mm de grosor en los tercios coronal, medio y apical utilizando un micrótomo de tejido duro con refrigeración continua por agua. Posteriormente, se realizó una prueba de expulsión para estas secciones utilizando una máquina de prueba universal (INSTRON 8801) a una velocidad del cabezal transversal de 1mm/min. Se utilizó el análisis de varianza unidireccional (ANOVA) para comparar las resistencias de la unión dentro de los grupos y el análisis post hoc multiple de Tukey se utilizó para la comparación por pares de las resistencias de la unión. Resultados: AH Plus exhibió una fuerza de unión de micro-expulsión más alta que BioRootRCS, aunque no difirieron significativamente (p>0,05). La preparación de los conductos radiculares con instrumentos rotativos ahusados al 6% mostró una fuerza de unión superior al 4%, aunque no difirieron significativamente (p>0,05). Conclusión: No hubo diferencias significativas entre los valores de fuerza de unión de micro-expulsión de BioRoot RCS y AH Plus. Los valores de la fuerza de unión fueron más altos en canales cónicos al 6% que en canales al 4%, aunque la diferencia no fue significativa estadísticamente.

Capacidade de Adesão de Cimentos Biocerâmicos e Resinosos com a Dentina Radicular: Uma Revisão Integrativa / Adhesion capacity of bioceramic and resin-based root canal sealer to root dentin: an integrative review

Objetivo: comparar a capacidade de adesão do cimento biocerâmico EndoSequence BC e do cimento resinoso AH Plus através de uma revisão integrativa. Material e Métodos: os bancos de dados online Medline/PubMed, Scopus, Web of Science e BVS foram utilizados para a revisão da literatura. Os critérios de elegibilidade incluíram artigos disponíveis na íntegra nas bases de dados pesquisadas, em inglês, e o conteúdo referente à adesão do cimento Endosequence BC sealer em comparação ao AH Plus. Resultados: foram encontrados 45 artigos. Após a remoção duplicada, 22 artigos foram selecionados. Após a leitura dos resumos, textos completos e aplicação dos critérios de inclusão, foram incluídos no total oito artigos. Em relação à capacidade de adesão dos cimentos testados, o AH Plus apresentou melhor adesão do que o cimento BC sealer em três artigos e menor adesão em dois artigos. Força de adesão semelhante foi observada entre os grupos em três estudos. Conclusões: com base nos estudos incluídos, o AH Plus apresenta maior resistência de união quando comparado ao BC Sealer

Aim: To compare the adhesion capacity of the bioceramic EndoSequence BC sealer and the AH Plus sealer through an integrative review. Methodology: The Medline/PubMed, Scopus, Web of Science and VHL online databases were used for the literature review. Eligibility criteria comprised articles available in full on the researched databases, in English, and content addressing Endosequence BC sealer adhesion compared to AH Plus sealer. Results: A total of 45 articles were found. After duplicate removal, 22 articles were selected. After reading the abstracts, full texts and applying the inclusion criteria, eight articles in total were included in the present study. Concerning the adhesion capacity of the tested cements, the AH Plus was reported as presenting better adhesion than the BC sealer in three articles, and less adhesion in two articles. Similar adherence strength was observed between groups in three studies. Conclusions: Based on the included studies, the AH Plus displays greater bond strength when compared to the BC Sealer.

A Case of Epoxy Resin-induced Hand Eczema in a Doll Craftswoman / 대한피부과학회지

No abstract available.

Epoxy sheet plastination on a rabbit head - new faster protocol with Biodur® E12/E1 / Plastinación de cortes con resina epoxi en una cabeza de conejo - nuevo protocolo rápido con Biodur® E12/E1

SUMMARY: Plastination is an anatomical technique of cadaveric preservation that allows the preservation of anatomical pieces indefinitely, in dry and odorless form. It was created in 1978 by Gunther von Hagens, in Heidelberg, Germany. In particular, the sheet plastination technique, with epoxy resin, allows the generation of thin sections of various anatomical regions, allowing an accurate visualization of anatomical structures of difficult access through dissection or cadaveric exploration. The aim of this work was to present a new sheet plastination protocol with Biodur® E12/E1, which is faster in its implementation, applied, for the first time, in a rabbit head.

RESUMEN: La plastinación es una técnica anatómica de preservación cadavérica que permite la conservación de piezas anatómicas indefinidamente, en forma seca e inodora. Fue creada en 1978 por Gunther von Hagens, en Heidelberg, Alemania. En particular, la técnica de plastinación de cortes, con resina epoxi, permite la generación de secciones delgadas de diversas regiones anatómicas, asegurando una visualización precisa de estructuras anatómicas de difícil acceso mediante disección o exploración de cadáveres. El objetivo de este trabajo fue presentar un nuevo protocolo de plastinación de cortes con resina Biodur® E12/E1, más rápido en su implementación, aplicada por primera vez, en una cabeza de conejo.

Bacterial leakage and micro-computed tomography evaluation in round-shaped canals obturated with bioceramic cone and sealer using matched single cone technique

OBJECTIVES: To evaluate sealing ability of root canals obturated with bioceramic-impregnated gutta percha cone (BCC) or gutta percha (GP), with bioceramic sealer (BCS) or AH Plus (AH; Dentsply-Maillefer), in roundly-prepared canals using matched single-cone technique, based on bacterial leakage test, and to analyze obturation quality using micro-computed tomography (CT) analysis. MATERIALS AND METHODS: Ninety-two distobuccal roots of maxillary molars were prepared using nickel-titanium files to apical size 40/0.06. The roots were divided into 4 groups (n = 20) that were obturated with a master cone and sealer: GP/AH, BCC/AH, GP/BCS, and BCC/BCS. Bacterial leakage model using Enterococcus faecalis was used to evaluate sealing ability for 60-day period. Obturated samples from each group (n = 4) were analyzed using micro-CT. RESULTS: All groups showed bacterial leakage at 20%–45% of samples with mean leakage times of 42–52 days. There were no significant differences in bacterial leakage among the groups. Micro-CT showed minimal gaps and voids in all groups at less than 1%. CONCLUSIONS: In roundly-prepared canals, the single cone obturation with BCC/BCS was comparable to GP/AH for bacterial leakage at 60 days.

Report on a sheet plastination technique using commercial epoxy resin / Reporte sobre una técnica de plastinación de cortes usando una resina epoxy comercial

Plastination is a conservation technique which allows anatomical pieces to be preserved, dry and odor-free, for an indefinite period. In particular, plastination of sections of tissue with epoxy resin allows very thin slices to be made of various regions of the anatomy, permitting close viewing of anatomical structures which are difficult to access by dissection or cadaver exploration. The objective of this work is to present a plastination technique developed in our laboratory for tissue sections using commercial epoxy resin, as an alternative to the existing classic plastination techniques. The technique was applied to a human knee, obtaining 5 mm thick sections which were compared with computerized tomography images. The development of an alternative sheet plastination technique using epoxy resin allows the preservation of anatomical regions which are difficult to study, with the possibility of comparing the sections with imaging studies. In this way anatomy can be usefully combined with clinical experience, allowing students to gain more significant knowledge of anatomy. The technique would also ensure provision of anatomical samples for research in the area of morphological science.

La plastinación es una técnica anatómica de conservación cadavérica que permite la preservación por tiempo indeterminado, en forma seca y sin olor, de piezas anatómicas. En particular, la técnica de plastinación por cortes, con resina epoxy, permite a su vez la generación de cortes delgados de diversas regiones anatómicas, permitiendo una visualización precisa de estructuras anatómicas de difícil acceso a través de la disección o la exploración cadavérica. El objetivo de este trabajo es el de presentar el desarrollo por parte de nuestro laboratorio de una técnica de plastinación de cortes con resina epoxy comercial, alternativa a las técnicas clásicas de plastinación de cortes existentes. Se aplicó la técnica en una rodilla humana, obteniéndose cortes de 5 mm de espesor, los cuales fueron comparados con imágenes de tomografía computada. El desarrollo de una técnica alternativa de plastinación de cortes con resina epoxy permitirá la conservación de regiones anatómicas de difícil estudio, con posibilidad de realizar la comparación de cortes con estudios imagenológicos, para combinar en forma adecuada la anatomía con la experiencia clínica y, de esta manera, permitir que el alumno alcance un aprendizaje más significativo de la anatomía, además de asegurar la obtención de muestras anatómicas para el desarrollo de investigación en el área de las ciencias morfológicas.

Three-dimensional Quantitative Porosity Characterization of Syringe- versus Hand-mixed Set Epoxy Resin Root Canal Sealer

The aim of the present study was to compare the porosity characteristics of AH Plus Jet(tm) syringe-mix and the conventional hand-mixed AH Plus root canal sealers by three-dimensional quantitative high-resolution micro-computed tomography (micro-CT). Seven test specimens were prepared from each tested sealer by a single operator following the manufacturer's instructions and poured into pre-lubricated plastic split-ring moulds. Set sealer test specimens were scanned using a micro-CT device and the shadow images were reconstructed into cross-sectional slices. The evaluated parameters were (i) total pore count, (ii) total pore volume and mean pore volume, (iii) total porosity (% of pore volume in relation to total sealer volume) and (iv) mean pore distance to the sealer lateral external surface. In both groups, most pores were localized within the external sealer perimeter (0.05 mm from the external surface). Hand-mixed AH Plus specimens showed statistically significant higher mean total pore count, total pore volume and total porosity (p=0.001) than the syringe-mixed specimens. However, mean pore sizes in AH Plus syringe-mixed specimens were significantly higher (p=0.046) than the AH Plus hand-mixed counterparts. Hand-mixed AH Plus was associated with higher total mean pore count, volume and total porosity compared to syringe mixed AH Plus.

Resumo O objetivo do presente estudo foi comparar a porosidade do AH Plus Jet(tm) dotado de misturador automático com o AH Plus convencional manipulado a mão a partir de um método quantitativo de microtomografia computadorizada (micro-CT). Para cada cimento, sete espécimes foram preparados por um único operador, seguindo as instruções do fabricante, e inseridas em anéis de plástico. Após o tempo de presa, os cimentos foram escaneados utilizando o micro-CT e as imagens foram reconstruídas. Os parâmetros avaliados foram (i) contagem total de poros, (ii) volume total de poros e média dos volumes dos poros, (iii) porosidade total (% de volume de poros em relação ao volume total do cimento) e (iv) distância média dos poros em relação ao perímetro externo (0,05 mm da superfície externa). O AH Plus manipulado a mão apresentou maior número de poros, maior volume total de poros e porosidade total (p=0,001) comparado com o AH Plus com misturador. No entanto, a média de tamanho dos poros foi estatisticamente superior no AH Plus com misturador quando comparado com o AH Plus manipulado a mão (p=0,046). O AH Plus manipulado a mão foi associado com uma maior média de poros, volume e porosidade quando comparado com o AH Plus com misturador.

Evaluación de una resina epóxica experimental como material alternativo para obtención de modelos odontológicos / Evaluation of an experimental epoxy resin as an alternative material for dental casts

El objetivo de este estudio fue comparar la fidelidad de copia y estabilidad dimensional entre modelos de resina epóxica y modelos de yeso (Fuji Rock EP - GC Europe; Implant Stone - Polidental). Fue realizada la impresión de una matriz de acero para obtener 30 especímenes (n=10). La matriz simulaba dos piezas dentarias talladas para recibir coronas totales, sobre éstas fueron adaptados dos copings metálicos con aletas horizontales. Se evaluó al microscopio (Microscopio Measurescope, Nikon) la distancia entre el coping y la línea de terminación de las piezas talladas (en adelante, "desadaptación vertical") y la distancia entre las aletas horizontales de los copings (en adelante, "desadaptación horizontal"), las medidas obtenidas entre la matriz de acero y copings metálicos fueron consideradas como grupo control. Los copings metálicos fueron después adaptados sobre los modelos de yeso y sobre la resina experimental y fue realizada la evaluación al microscopio del mismo modo que el descrito anteriormente. Fueron realizadas 3 mediciones en dos tiempos (24 y 48 horas). Respecto a la desadaptación horizontal, el yeso FujiRock presentó una mejor estabilidad dimensional después de 24 horas, ya que la desadaptación fue similar estadísticamente a la desadaptación de la matriz (control) (p>0,05). Después de 48 horas, todos los grupos presentaron valores similares a la matriz (p>0,05). Respecto a la desadaptación vertical, todos los materiales presentaron diferencia estadísticamente significante en relación a la matriz (p?0,05), sin embargo, no hubo diferencia entre los materiales evaluados (p>0,05). La resina epóxica experimental puede ser una alternativa viable para la obtención de modelos odontológicos...

The aim of this study was to compare the accuracy of surface detail reproduction and dimensional stability of casts made from an experimental epoxy resin and gypsum (Fuji Rock EP - GC Europe; Implant Stone - Polidental). A steel matrix was molded to obtain 30 cast samples (n=10). The matrix simulated two teeth prepared to receive total crowns on which two metal copings with horizontal flaps were adapted. Three readings were performed (Measurescope microscope, Nikon) in order to measure the vertical and horizontal misfit and those readings were used as control. Metal copings were adapted over the gypsum and epoxy resin casts and three measurements were made in two periods (24 and 48 hours). Regarding the horizontal misfit, Fujirock had better dimensional stability after 24 hours, being statistically similar to the matrix (p> 0.05). After 48 hours, all groups had statistically similar values to the matrix (p> 0.05). Regarding the vertical misfit, all materials were statistically different in relation to the matrix (p ? 0.05). However, there was no statistically significant difference between the materials evaluated (p> 0.05). The experimental epoxy resin could be a suitable alternative to obtain dental casts...

An amperometric cholesterol biosensor based on epoxy resin membrane bound cholesterol oxidase.

Background & objectives: The use of epoxy resin membrane as a support for immobilization of enzyme has resulted into improved sensitivity and stability of biosensors for uric acid, ascorbic acid and polyphenols. The present work was aimed to prepare an improved amperometric biosensor for determination of serum cholesterol required in the diagnostics and management of certain pathological conditions. Methods: Epoxy resin membrane with immobilized cholesterol oxidase was mounted on the cleaned platinum (Pt) electrode with a parafilm to construct a working electrode. This working electrode along with Ag/AgCl as reference and Ag wire as an auxiliary electrode were connected through a three terminal electrometer to construct a cholesterol biosensor. Results: The sensor showed optimum response within 25 sec at pH 7.0 and 45°C. The linear working range of biosensor was 1.0 to 8.0 mM cholesterol. Km and Imax for cholesterol were 5.0 mM and 9.09 μA, respectively. The biosensor measured serum cholesterol. The minimum detection limit of the sensor was 1.0 mM. The mean analytical recoveries of added cholesterol in serum (2.84 and 4.13 mM) were 91.4±2.8 and 92.3±3.1 per cent (n=6), respectively. Within and between assay coefficient of variation (CV) were <2 and <4 per cent, respectively. Biosensor had a storage life of 6 months at 4°C. Interpretation & conclusions: The use of epoxy resin membrane as a support for immobilization of cholesterol oxidase has resulted into an improved amperometric cholesterol biosensor. The present biosensor had an advantage over the existing biosensors as it worked at comparatively lower potential.

Physical properties of novel composite using Portland cement for retro-filling material / 대한치과보존학회지

OBJECTIVES: The aim of this study was to compare apical sealing ability and physical properties of MTA, MTA - AH-plus mixture (AMTA) and experimental Portland cement - Epoxy resin mixture (EPPC) for a development of a novel retro-filling material. MATERIALS AND METHODS: Forty-nine extracted roots were instrumented and filled with gutta-percha. Apical root was resected at 3 mm and the retro-filling cavity was prepared for 3 mm depth. Roots were randomly divided into 3 groups of 15 roots each. The retro-filling was done using MTA, AMTA, and EPPC as the groups divided. Four roots were used as control groups. After setting in humid condition for 24 hours, the roots were immersed in 1% methylene blue dye solution for 72 hours to test the apical leakage. After immersion, the roots were vertically sectioned and photos were taken to evaluate microleakage. Setting times were measured with Vicat apparatus and digital radiographs were taken to evaluate aluminum equivalent thickness using aluminum step wedge. The results of microleakage and setting time were compared between groups using one-way ANOVA and Scheffe's post-hoc comparison at the significance level of 95%. RESULTS: AMTA and EPPC showed less microleakage than MTA group (p < 0.05). AMTA showed the highest radio-opacity than other groups and the novel EPPC showed 5 mm aluminum thickness radio-opacity. EPPC showed the shortest initial and final setting times than other groups while the MTA showed the longest (p < 0.05). CONCLUSIONS: Under the condition of this study, the novel composite using Portland cement-Epoxy resin mixture may useful for retro-filling with the properties of favorable leakage resistance, radio-opacity and short setting time.

A Case of Allergic Contact Dermatitis Caused by Epichlorohydrin and tris-DMP in an Epoxy Resin Worker / 대한산업의학회지

BACKGROUND: Epoxy resin compounds are one of the common causes of occupational allergic contact dermatitis. In Korea, most cases of allergic contact dermatitis from epoxy resin compounds have been caused by the epoxy resin itself. We report a rare case of allergic contact dermatitis which was caused by epichlorohydrin, an ingredient of epoxy resin and 2,4,6-tris-(dimethylaminomethyl)phenol (tris-DMP), a kind of hardeners. CASE REPORT: A 43-year-old man, who had worked at the epoxy resin glue manufacturing factory since 1999, presented with mild and intermittent erythematous papules and rashes on his face, neck, trunk, and both arms. He was dealing with epoxy resin, epichlorohydrin, bisphenol A and hardeners. After a new hardener was added in August 2008, his skin lesions worsened from what he had experienced in the past. A skin patch test was performed to identify the causative chemicals of the skin lesion. Epichlorohydrin and tris-DMP elicited positive reactions after 48 hours and increased after 96 hours. CONCLUSION: This case confirmed occupational allergic contact dermatitis caused by epichlorohydrin and tris-DMP, an ingredient of epoxy resin and a hardener, respectively.

Dermatosis profesional por resina epoxi: Presentación de un caso clínico / Professional dermatosis for epoxy resin: A clinical case report

Mostramos un caso de dermatosis profesional originado por plásticos (resinas epoxi) y la importancia de la detección precoz. Las resinas epoxi son de gran utilización en todo tipo de industrias (artes graficas, construcción, electrónica, componentes de prótesis traumatológicas, prótesis odontológicas, etc.) y sus componentes pueden ser causa de dermatitis de contacto irritativa y por sensibilización.

We describe a case of professional dermatosis caused by exposition to plastic products (epoxy resin) and importance of early detection. The epoxy resins are widely used in all types of industries (graphics arts, construction, electronics, traumathological and odontological prothesis, etc.) and their components may be the cause of contact dermatitis and sensitivity. Risk factors at work with epoxy resins are present during the production base resins, hardening agents, plasticizers and dilutants increase the risk of exposition at work. This requires preventive measures and early diagnosis.

A Case of Epoxy Resin Induced Thermal Injury in Upper Gastrointestinal Tract / 대한소화기내시경학회지

Epoxy resins has been used as a adhesive material in industry. Toxic effects for epoxy resin are known as respiratory, dermatologic, ophthalmologic and allergic symptoms. Ingestion of epoxy resin has been known to induce moderate toxic effect, but reports are very rare. Toxic injury due to ingestion in gastrointestinal tract is usually caused by suicidal attempt or incidental ingestion in young ages and alcoholics. Herein, we report a case of diffuse mucosal injury in upper gastrointestinal tract caused by thermal injury from epoxy resin with a review of relevant literatures.

Evaluation of the Interfaces Between Implants And Regenerated Bone Using Bone Morphogenetic Protein and Demineralized Freeze-dried Bone

Various methods and graft materials have been used to fill in the defect adjacent to the implants and considered as clinically acceptable. But it is not clear whether the regenerated bone increases the implant-bone contact and supports the implant. The purpose of this study is to evaluate regenerated bone surrounding implants using bone morphogenetic protein(BMP) and demineralized freeze-dried bone(DFDB), and the interfaces between implants and regenerated bone. bBMP was extracted and partially purified from the bovine bone matrix using heparine chromatography. Demineralized freeze-dried bone was made from the dog. Inactive insoluble collagenous bone matrix(IBM) of dog was used as carrier of bBMP. Interfaces of titanium coated epoxy resin implants were processed for demineralized section for transmission electron microscopy(TEM) and those of screw type implants were for nondemineralized section for light and fluoromicroscopic examination. Implants were inserted in the inferior border of mandible of adult dogs and artificial bony defects (3x3x4mm) were made at the mesial and distal side of implants. Defects were filled with BMP(BMP group) and DFDB(DFDB group). For the fluoromicroscopic examination, the fluorescent dyes (oxytetracycline, calcein green, alizarin red) were injected 2, 4, 6, 8, 12 weeks after implantation. The experimental animals were sacrificed at the 6th and the 12th week and their mandible were extirpated and processed for examination with light microscopy, fluoromicroscopy and TEM. The obtained results were as follows : 1. By the light microscopic findings, the defects were filled with woven bone at the 6th week and compact bone at the 12th week, and the osseointegrations were seen in both groups. There was no histological difference between them. 2. On the basis of the histomorphometric analysis, BMP group (6th week: 40.25%, 12th week: 56.04%) had higher bony contact ratio than DFDB group (38.37%, 42.63%). There was significant difference between two groups at the 12th week (P<0.05). 3. The amount of bone formation in BMP group was more prominent than in DFDB group. Significant difference was noted among two groups at the 6th and the 8th week (P<0.05). 4. By the transmission electron microscopic findings, 0.4-2micrometer soft tissue layer was found in adjacent to the interfaces and over the collagen fibrils of bone at the 6th week. However, about 100nm amorphous layer was noted at the interface or collagen fibrils directly extended to the titanium surface at the 12th week. There was no significant difference between two groups. 5. These results suggest that BMP and DFDB can be used as good graft materials in the regeneration of bone adjacent to implant, and BMP is more valuable as a bone inducer than DFDB.

Contact urticaria to bisphenol-A-Diglycidylether dental resin / 천식및알레르기

Epoxy resin based on Diglycidyl-ether-Bisphenol-A has been commonly used in dental fillings and dentures. Epoxy resin is a well known low molecular weight chemical sensitizer, but contact urticaria from epoxy resin has been infrequently reported despite it's wide use in dental practice. We report a case of a 48-year-old housewife who presented a recurrent episode of perioral erythema and angioedema associated with dental work. These symptoms, which occurred within 2 hours of having dental fillings, were aggravated with repeated dental procedures for a period of several days. Her symptoms improved after removal of dental fillings. Her contact urticaria to epoxy resin was reproduced by patch test with AH26 root canal sealer containing Bisphenol-A type epoxy resin. Delayed type reaction to epoxy resin was also noted. Her symptoms did not reoccur after use of another type of root canal sealer.